DGLR-Publikationsdatenbank - Detailansicht

Titel:

The Design of Test-Section Inserts for Higher Speed Aeroacoustic Testing in the Ames 80 by 120 Foot Wind Tunnel

Autor(en):
P.T. Soderman, L.E. Olsen
Zusammenfassung:
An engineering feasibility study was made of aeroacoustic inserts designed for large-scale acoustic research on aircraft models in the 80- by 120- Foot Wind Tunnel at NASA Ames Research Center. The goal was to find test-section modifications that would allow improved aeroacoustic testing at airspeeds equal to and above the current 100 knots limit. Results indicate that the required maximum airspeed drives the design of a particular insert. Using goals of 200, 150, and 100 knots airspeed, the analysis led to a 30 x 60 ft open-jet test section, a 40 x 80 ft open-jet test section, and a 70 x 110 ft closed test section with enhanced wall lining, respectively. The open-jet inserts would be composed of a nozzle, collector, diffuser, and acoustic wedges incorporated in the existing 80 x 120 ft test section. The closed test section would be composed of approximately 5-ft acoustic wedges covered by a porous plate attached to the test-section walls of the existing 80 x 120. All designs would require a double row of acoustic vanes between the test section and fan drive to attenuate fan noise and, in the case of the open-jet designs, to control flow separation at the diffuser downstream end. The inserts would allow virtually anechoic acoustic studies of large helicopter models, jets, and V/STOL aircraft models in simulated flight. Model scale studies would be necessary to optimize the aerodynamic and acoustic performance of any of the designs. Successful development of acoustically transparent walls, though not strictly necessary to the project, would lead to a porous-wall test section that could be substituted for any of the open-jet designs, and thereby eliminate many aerodynamic and acoustic problems characteristic of open-jet shear layers.
Veranstaltung:
DGLR/AIAA 14th Aeroacoustics Conference, 1992
Medientyp:
Conference Paper
Sprache:
englisch
Format:
21,0 x 29,7 cm, 10 Seiten
Veröffentlicht:
DGLR-Bericht, 1992, 1992-03, DGLR/AIAA 14th Aeroacoustics Conference - Proceedings; S.196-205; 1992; Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V., Bonn
Preis:
NA
ISBN:
ISSN:
Kommentar:
Klassifikation:
Stichworte zum Inhalt:
aeroacoustics
Verfügbarkeit:
Bibliothek
Veröffentlicht:
1992


Dieses Dokument ist Teil einer übergeordneten Publikation:
DGLR/AIAA 14th Aeroacoustics Conference - Proceedings