R. Chandra, I. Chopra

This paper presents an analytical-cum-experimental study of the structural response of composite rotor blades with elastic couplings. Vlasov theory is expanded to analyze two-cell composite rotor blades made out of general composite laminates including the transverse shear deformation of the crosssection. Variation of shear stiffness along the contour of the section is included in the warping function . In order to validate this analysis, two-cell graphite-epoxy composite blades with extension-torsion coupling were fabricated using matched-die molding technique. These blades were tested under tip bending and torsional loads, and their structural response in terms of bending slope and twist was measured with a laser optical system. Good correlation between theory and experiment is achieved. Axial force induced twist rate of the order of 0.2 degree per inch length can be realized in extensiontorsion coupled blades with a hygrothermally stable [20/-70]2s layup for potential applications in the design of tilt rotors.

17th European Rotorcraft Forum 1991, Berlin

Conference Paper

englisch

21,0 x 29,7 cm, 20 Seiten

DGLR-Bericht, 1991, 1991-08, 17th European Rotorcraft Forum Proceedings; 1991; Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V., Bonn

NA

Dieser Aufsatz ist nicht Teil der Veröffentlichung!

rotor blades, composite materials, helicopters

Bestellbar

1991